![]() The panel operations for these procedures are different for different ETERNUS tape library. ![]() In the device parameter of the DEFINE PATH command, define the device file of the drive unit connected to the tape server of the disaster recovery site that was recognized as described in " 14.7.3 Restoring the TSM backup environment".įigure 14.5 Example of editing the devconfig file at the operation siteĭelete the library inventory information (storage volume information) defined in this file.įigure 14.6 Example of editing the devconfig file at the operation siteĪn example of the change is described below.ĮTERNUS tape library used at the operation siteĮTERNUS tape library connected to the disaster recovery siteĪn example of changing the devconfig file in this instance is described below.įigure 14.7 Example of editing the devconfig file at the operation siteįigure 14.8 Example of devconfig file after editing Subsequent to the above actions, the library control function may not be used during the restoration process of the TSM database.įigure 14.4 Example of editing the devconfig file at the operation siteĬhange the DEFINE DRIVE and DEFINE PATH commands defined in this file to that applicable to a single drive unit.Įven if the ETERNUS tape library is a model with multiple drive units, this drive unit definition must be set as a single unit.ĭo not change the library name and drive name.ĭelete the operands that come after the drive name parameters in the DEFINE DRIVE command. The library name of this command may not be changed.ĭelete the DEFINE PATH command where DESTTYPE=LIBRARY is specified. ![]() ![]() Do not change areas other than shaded or boxed areas of each command.Ĭhange the library type of the DEFINE LIBRARY command from SCSI to MANUAL, and delete operands that come after the LIBTYPE operand.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |